Link a Redis cluster to a dedicated server

For your information

Some dedicated server configurations in the Chipcore Line cannot be added to a global router network because they do not have a port for connecting to a private network. You can check for a private network port in the Control panel on the server page under the Ports.

1. Create a global router.
2. Connect a network and subnet to the global router up to the dedicated server VLAN.
3. Connect a network and subnet to the global router up to the Cloud Platform project.
4. Assign IP addresses from the created subnets to the dedicated server.
5. Specify routes on the dedicated server.
6. Create a Managed Database cluster: new or from a backup of an existing Managed Database cluster.

See an example of creating network connectivity between a dedicated server and a Managed Database.

Example of network organization between a Managed Database and a dedicated server

If you need to configure private connectivity between a dedicated server in the SPB-2 pool and a new Managed Database in the ru-2 pool:

1. Create a global router.
2. Connect two private subnets to the router — 192.168.0.0/29 with a gateway of 192.168.0.1 for the SPB-2 pool and 172.16.0.0/29 with a gateway of 172.16.0.1 for the ru-2 pool.
3. Assign an address from the 192.168.0.0/29 subnet to the dedicated server, for example, 192.168.0.2.
4. Specify routes on the dedicated server in the SPB-2 pool — to the subnet 172.16.0.0/29 through gateway 192.168.0.1.
5. Create a new Managed Database cluster on subnet 172.16.0.0/29.

Create a global router

1. In the Control panel, in the top menu, click Products and select Global Router.
2. Click Create router. A limit of five global routers is set for each account.
3. Enter the router name.
4. Click Create.
5. If the router was created with the status ERROR or is stuck in one of the statuses, create a ticket.

Connect a network and subnet to the router up to the dedicated server VLAN

You can connect a new or existing network to the router if it is not already connected to any of the account's global routers.

1. In the control panel, on the top menu, click Products and select Global Router.

2. Go to the router page → Networks tab.

3. Click Create network.

4. Enter a network name. It will only be used in the control panel.

5. Select the Servers and Equipment service.

6. Select a location for the network.

7. Select or enter a VLAN.

8. If you want to create a network up to an internal segment (Q-in-Q), specify its tag—a number from 2 to 4094. If a network already exists for the VLAN, you must specify the Q-in-Q segment of this VLAN.

9. Enter a subnet name. It will only be used in the control panel.

10. Enter the CIDR—the IP address and mask of the private subnet. You can enter a new subnet or an existing private server subnet if it has not yet been added to any of the global routers in the account. The subnet must meet the following conditions:

    • belong to the RFC 1918 private address range: 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16;
    • have a size of at least /29, as three addresses will be occupied by Servercore network equipment;
    • do not overlap with other subnets added to this router—IP addresses must not repeat across subnets on the same router;
    • if a Managed Kubernetes cluster on cloud servers is included in the global router network, the subnet must not overlap with the ranges 10.10.0.0/16, 10.96.0.0/12, 10.250.0.0/16 and 10.251.0.0/24. If a cluster on dedicated servers is included in the network — with ranges 10.10.0.0/16, 10.222.0.0/16, 10.250.0.0/16, 10.251.0.0/24 and 172.250.0.0/14. These subnets are used for Managed Kubernetes internal addressing, and their use may lead to conflicts in the global router network.

11. Enter the gateway IP or leave the first address from the subnet that is assigned by default. Do not assign this address to your devices to avoid network disruption.

12. Enter the service IPs or leave the last addresses from the subnet that are assigned by default. Do not assign these addresses to your devices to avoid network disruption.

13. Click Create network.

14. Optional: check the network topology on the global router. In the Control panel, in the top menu, click Products → Global Router → router page → Network map.

15. If you specified a Q-in-Q tag in step 8, you need to enable Q-in-Q technology on the switch port and configure the private network interface that you specified in step 10. Learn more in the Configure Q-in-Q section of the Q-in-Q guide.

Connect a network and subnet to the router up to the Cloud Platform project

You can connect a new or existing network to the router if it is not already connected to any of the account's global routers.

Connect a new network

1. In the Control panel, on the top menu, click Products and select Global Router.

2. Open the router page → Networks tab.

3. Click Create network.

4. Enter a network name. It will only be used in the control panel.

5. Select the Cloud Platform service.

6. Select a location for the network.

7. Select a project.

8. Enter a subnet name. It will only be used in the control panel.

9. Enter the CIDR — IP address and subnet mask. The subnet must meet the following conditions:

   • belong to the RFC 1918 private address range: 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16;
   • have a size of at least /29, as three addresses will be occupied by Servercore network equipment;
   • it does not overlap with other subnets added to this router — there must be no identical IP addresses within the subnets of one router;
   • if a Managed Kubernetes cluster on cloud servers is to be connected to the global router network, the subnet must not overlap with the 10.10.0.0/16, 10.96.0.0/12, 10.250.0.0/16 and 10.251.0.0/24. If a cluster on dedicated servers is connected to the network, it must not overlap with the 10.10.0.0/16, 10.222.0.0/16, 10.250.0.0/16, 10.251.0.0/24 and 172.250.0.0/14. These subnets are used for Managed Kubernetes internal addressing, and their use may cause conflicts in the global router network.

10. Enter the gateway IP or leave the first address from the subnet, which is assigned by default. Do not assign this address to your devices to avoid disrupting network operation.

11. Enter the service IPs or leave the last addresses from the subnet, which are assigned by default. Do not assign these addresses to your devices to avoid disrupting network operation.

12. Click Create network.

13. Optional: check the network topology on the global router. In the Control panel, on the top menu, click Products → Global Router → router page → Network Map.

Connect an existing network

1. Ensure the network is not already added to any global router in your account. In the Control panel, on the top menu, click Products → Cloud Servers → Network → tab Private networks → check that the network card does not have the tag Global Router.

2. Verify that the subnet meets the following conditions:

   • belongs to the RFC 1918 private address range: 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16;
   • is at least /29, as three addresses will be occupied by Servercore network equipment;
   • it does not overlap with other subnets added to this router: the IP addresses of each subnet on the router must not match the IP addresses of other subnets on it;
   • if a Managed Kubernetes cluster on cloud servers is to be connected to the global router network, the subnet must not overlap with the 10.10.0.0/16, 10.96.0.0/12, 10.250.0.0/16 and 10.251.0.0/24. If a cluster on dedicated servers is connected to the network, it must not overlap with the 10.10.0.0/16, 10.222.0.0/16, 10.250.0.0/16, 10.251.0.0/24 and 172.250.0.0/14. These subnets are used for Managed Kubernetes internal addressing, and their use may cause conflicts in the global router network.

3. In the Control panel, on the top menu, click Products and select Cloud Servers.

4. Go to Network → tab Private networks.

5. From the network menu, select Connect to Global Router.

6. Select a global router.

7. For each subnet in the network, enter the IP address to be assigned to the router or leave the first available address from the subnet, which is assigned by default. Do not assign this address to your devices to avoid disrupting network operation. The last two available subnet addresses will be reserved as service addresses.

8. Click Connect. Do not close the window until a message appears confirming the network has been connected. After that, in the control panel:

   • the network will appear in the section Servercore Global Router on the router page to which you connected it;
   • in the section Cloud Servers → Network → on the tab Private networks, the network will have the tag Global Router.

Assign an IP address to the dedicated server

Configure a local port on the dedicated server that is included in the global router network. Assign an IP address from the private subnet that you connected to the global router for the dedicated server.

Ubuntu

1. Connect to the server via SSH or via KVM console.

2. Open the netplan utility configuration file with the vi:

   vi /etc/netplan/01-netcfg.yaml

3. Add or change the values of the private network interface settings:

       <eth_name>:
               addresses: [<ip_address>]

   Specify:

   • <eth_name> — the name of the private network interface;
   • <ip_address> — the private IP address of the server with a subnet mask, for example 192.168.0.2/24.

4. Press ESC.

5. Exit the vi text editor with your changes saved:

   :wq

6. Apply the configuration:

   netplan apply

7. Optional: reboot the server.

8. Optional: assign a private IP address to the server in the control panel.

Debian

1. Connect to the server via SSH or via KVM console.

2. Open the network interfaces configuration file with the vi:

   vi /etc/network/interfaces.d/50-cloud-init

3. Add or change the values of the private network interface settings:

   auto <eth_name>
   iface <eth_name> inet static
       address <ip_address>/<mask>

   Specify:

   • <eth_name> — the name of the private network interface;
   • <ip_address> — the private IP address of the server, for example 192.168.0.2;
   • <mask> — the subnet mask, for example /24.

4. Press ESC.

5. Exit the vi text editor with your changes saved:

   :wq

6. Restart the network:

   service networking restart

7. Optional: reboot the server.

8. Optional: assign a private IP address to the server in the control panel.

CentOS

1. Connect to the server via SSH or via KVM console.

2. Output information about the network interfaces:

   ip address

3. Create or open the private network interface configuration file with the vi:

   vi /etc/sysconfig/network-scripts/ifcfg-<eth_name>

   Specify <eth_name> — the name of the private network interface.

4. Add or change the values of the network interface settings:

   NAME="<eth_name>"
   ONBOOT=yes
   BOOTPROTO=none
   IPADDR="<ip_address>"

   Specify:

   • <eth_name> — the name of the private network interface;
   • <ip_address> — the private IP address of the server with a subnet mask, for example 192.168.0.2/24;

5. Press ESC.

6. Exit the vi text editor with your changes saved:

   :wq

7. Restart the network:

   systemctl restart network

8. Optional: reboot the server.

9. Optional: assign a private IP address to the server in the control panel.

Windows

1. Connect to the server via RDP or via KVM console.

2. Open the Network and Sharing Center.

3. Open the private network interface.

4. Click Properties.

5. From the list, select IPv4.

6. Click Properties.

7. Specify the network interface parameters:

   • IP-address — the private IP address of the server with a subnet mask, for example 192.168.0.2;
   • Subnet mask — the subnet mask.

8. Click OK.

9. Optional: assign a private IP address to the server in the control panel.

Specify a route on the dedicated server

You need to specify a static route on the server to the Cloud Platform subnet that you connected to the global router.

Ubuntu

1. Connect to the server.

2. Open the network configuration file:

   vi /etc/netplan/01-netcfg.yaml

3. At the end of the data block for the required network interface, add the route:

   routes:
     - to: <ip_address>/<mask>
       via: <gateway>

   Specify:

   • <ip_address>/<mask> — the subnet to which you need to add a route, specifying the mask, for example 192.168.0.0/28;
   • <gateway> — the gateway for the current server's subnet, which is specified on the global router.

4. If you need to define multiple routes, add them sequentially in the same block, for example:

   routes:
   - to: 192.168.0.0/28
       via: 172.16.0.1
   - to: 192.168.1.0/28
       via: 172.16.0.1

5. Save the file.

6. Check the settings:

   sudo netplan try

7. Apply the changes:

   netplan apply

Debian

1. Connect to the server.

2. Open the network configuration file:

   vi  /etc/network/interfaces

3. At the end of the data block for the corresponding network interface, add the required route:

   up route add -net <ip_address> netmask <mask> gw <gateway>
   down route del -net <ip_address> netmask <mask> gw <gateway>

   Specify:

   • <ip_address> — the subnet to which you need to add a route, for example 192.168.0.0;
   • <mask> — the subnet mask to which you need to add a route, for example 255.255.255.0;
   • <gateway> — the gateway for the current server's subnet, which is specified on the global router.

4. If you need to define multiple routes, add them sequentially in the same block.

5. Save the file.

6. Restart the network:

   sudo /etc/init.d/networking restart

CentOS

1. Connect to the server.

2. Create and fill out the file for configuring static routes:

   echo "<ip_address>/<mask> via <gateway>" >> /etc/sysconfig/network-scripts/route-<eth_name>

   Specify:

   • <ip_address>/<mask> — the subnet to which you need to add a route, specifying the mask, for example 192.168.1.0/28;
   • <gateway> — the gateway for the current server's subnet, which is specified on the global router;
   • <eth_name> — the name of the corresponding local network interface.

   If you need to add multiple routes, specify them in one command. List each route on a new line, for example:

   echo "192.168.0.0/28 via 172.16.0.1
   192.168.1.0/28 via 172.16.0.1" >> /etc/sysconfig/network-scripts/route-eno2

3. Restart the network:

   systemctl restart network

Windows

1. Connect to the server via RDP or via KVM console.

2. Add the required routes one by one:

   route -p ADD <ip_address> MASK <mask> <gateway> METRIC <x>

   Specify:

   • <ip_address> — the subnet to which you need to add a route, for example 192.168.0.0;
   • <mask> — the subnet mask to which you need to add a route, for example 255.255.255.0;
   • <gateway> — the gateway for the current server's subnet, which is specified on the global router;
   • <x> — a parameter determining the priority of the specified gateway, 1 being the highest priority.

Create a Managed Database cluster

New

1. In the Control panel, on the top menu, click Products and select Managed Databases.

2. Click Create cluster.

3. Enter the cluster name.

4. Select a location. You cannot change the location after creation.

5. Select a DBMS — Redis.

6. Select the Redis version. You cannot change the version after creation.

7. Select a configuration line and configuration.

8. Optional: to configure cluster high availability, in the High availability block, specify the number of nodes in the cluster. The first node is the master node, and the others are replicas. For a multi-node cluster, SLA applies — we guarantee 99.95% write availability and 99.99% read availability.

9. Select an eviction policy.

10. Enter the user password or click Generate. The password must contain:

    • 32 to 64 characters;
    • uppercase and lowercase Latin letters;
    • digits;
    • special characters.

11. Copy and save the user password — you need it to connect to the cluster. The password cannot be viewed in the Control panel, but it can be changed.

12. Select the subnet that you connected to the global router up to the Cloud Platform project.

    You can limit the list of addresses from which access to the database cluster is allowed.

13. Check the cluster price.

14. Click Create cluster. The cluster will be ready for use when it switches to the ACTIVE.

From backup

1. In the Control panel, on the top menu, click Products and select Managed Databases.

2. Click Create cluster.

3. Select a location that hosts your existing Managed Database cluster.

4. Select the Restore cluster from backup checkbox.

5. Select an existing Managed Database cluster.

6. Choose how to restore the cluster — from the latest available backup or to a specific point in time within the last 7 days.

7. Click Continue.

8. Select a configuration line and configuration.

9. Optional: select the Add replicas checkbox and specify the number of replicas. Replicas improve cluster high availability.

10. Select an eviction policy.

11. Select the subnet that you connected to the global router up to the Cloud Platform project.

    You can limit the list of addresses from which access to the database cluster is allowed.

12. Click Create cluster.

13. After the cluster is restored, the node addresses will change — update them in your application.